The TZU5-B 30kA Type 2 Surge Protection Device offers a 30kA nominal discharge current (In) and 60kA maximum discharge current (Imax) for low-voltage AC distribution systems. Designed for distribution boards and industrial control cabinets, it uses plug-in modules for convenient replacement, with built-in thermal disconnection and a visual status indicator to help identify when the SPD requires attention.
The TZU5-C 20kA Type 2 AC Surge Protection Device provides transient overvoltage protection for low-voltage AC distribution systems. It handles a nominal discharge current (In) of 20kA and a maximum discharge current (Imax) of 40kA. Plug-in modules simplify replacement, while the visual status indicator and thermal disconnection mechanism help maintenance personnel check the device condition and identify when attention is needed.
The TZU-40 3P+NPE Type 2 AC Surge Protection Device is configured for three-phase 380V distribution systems, with a nominal discharge current (In) of 20kA and a maximum discharge current (Imax) of 40kA. Its four plug-in modules provide a practical setup for industrial and commercial power distribution, while individual thermal disconnection and visual fault indication help identify modules that need attention during inspection.
The TUZHAV 1P+NPE Type 2 AC Surge Protection Device is designed for single-phase 220V AC distribution systems. With In 20kA, Imax 40kA and Up ≤ 1.2kV, it features plug-in modules, thermal disconnection and visual fault indication.
The TU-SHAN Electric Type 2 AC Surge Protective Device 10kA 20kA is designed for AC power distribution systems where transient overvoltage protection is required. Its compact DIN rail design, built-in thermal disconnection and visual status window support installation and routine inspection in compatible electrical panels.
Type 2 protection for compatible AC distribution and branch circuits
1P+NPE configuration for suitable single-phase installations
MOV-based protection with built-in thermal disconnection
Visual status window for checking the device condition
35 mm DIN rail mounting for electrical distribution enclosures
The 20kA 3P+NPE Type 2 AC Surge Protector is designed for three-phase AC 380V distribution systems. Its four-module configuration provides L1-PE, L2-PE, L3-PE, and N-PE protection, with In of 10kA, Imax of 20kA, and a specified Up of ≤1.0kV. It supports 35mm DIN rail mounting.
As a reliable Surge Protection Device manufacturer and supplier in China, we have our own factory. If you want to buy quality electrical protection products, please contact us.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy