A Type 2 AC Surge Protection Device is used in low-voltage AC distribution systems to limit transient overvoltages caused by induced lightning surges and electrical switching operations. Installed at a suitable distribution board, it helps reduce the surge voltage reaching connected equipment and provides a practical layer of protection between the incoming power supply and downstream circuits.
TU-SHAN Electric manufactures AC surge protection devices for building distribution boards, commercial facilities, industrial control panels, and compatible photovoltaic AC-side applications. We supply different pole configurations and electrical ratings for project requirements, with technical selection support, wholesale supply, and OEM/ODM options available for qualified orders.
Not every electrical installation faces the same surge conditions. A building with several distribution boards, a factory with variable frequency drives, and a commercial facility with extensive monitoring equipment may require different protection arrangements.
A Type 2 AC SPD is commonly installed in a sub-distribution board or another suitable point within the low-voltage distribution network. It limits transient overvoltage by conducting surge current through its protective circuit when the voltage exceeds its operating threshold. The appropriate device depends on the system voltage, earthing arrangement, expected surge exposure, and the withstand capability of connected equipment.
Under normal operating conditions, the surge protective device remains in its normal operating state. When a transient overvoltage occurs, its internal protective components respond by providing a path for surge current and limiting the voltage across the protected circuit.
After the transient event, the device returns to its normal operating state if it remains functional. Severe or repeated surges can cause protective components to deteriorate, so the device's status indicator, where fitted, and the manufacturer's replacement instructions should be checked during maintenance.
The protection level depends on the device's tested electrical characteristics and the installation. Short connecting conductors, appropriate upstream protection, and coordination with other SPDs can affect the voltage that actually reaches sensitive equipment. A Type 2 SPD helps reduce transient overvoltage; it is not a voltage regulator and does not correct sustained overvoltage, undervoltage, or every type of power-quality problem.
For distributors, panel builders, and electrical contractors, choosing a Type 2 AC Surge Protective Device involves more than selecting a nominal current rating. The device must match the supply system and the expected surge conditions. TU-SHAN Electric can confirm model-specific ratings against the intended application before an order is finalized.
The 220 V and 385 V AC options, 20–100 kA discharge-current range, and 1P to 4P configurations in this category should be treated as selection ranges rather than ratings available on every model. The exact In, Imax, Uc, Up, and other electrical values must be confirmed from the relevant model datasheet.
A Type 2 SPD is generally installed at a suitable distribution point where it can limit transient overvoltage before it reaches downstream circuits. The final location depends on the installation design, incoming supply conditions, existing lightning protection, and the distance between the SPD and the equipment requiring protection.
In installations exposed to direct lightning-current effects or where the relevant design requires Type 1 protection, a Type 1 SPD may be installed at the incoming supply, with Type 2 devices used farther downstream. Additional protection close to sensitive equipment may be appropriate where the installation conditions call for it. These devices must be selected and coordinated as a system rather than treated as interchangeable products.
MCBs and SPD backup protection devices serve different purposes. An MCB provides overcurrent protection for a circuit. A dedicated SPD backup protective device, including a compatible SCB where specified, is selected to coordinate with the SPD and help disconnect it safely under relevant fault conditions. Follow the SPD manufacturer's instructions and the applicable electrical installation requirements when determining the protection arrangement.
WENZHOU TUSH-AN ELECTRIC CO., LTD. was established in 2018. The team brings more than 20 years of combined low-voltage electrical product experience and focuses on surge protective devices, SPD backup protective devices, and miniature circuit breakers.
Our manufacturing processes include welding, glue filling where required by the product design, assembly, electrical testing, and final inspection. Production equipment includes automatic welding machines and testing equipment. The company's overall product capacity is approximately 100,000 units per month across its product range; actual capacity and lead time depend on the model, order quantity, and customization requirements.
For importers, electrical wholesalers, panel builders, and project suppliers, we can discuss standard model selection, sample arrangements, private-label requirements, and suitable production options before an order is placed.
T U Z H A N Electric supports project-based purchasing as well as repeat orders for distribution. Standard models can be evaluated against your required ratings and installation conditions, while customization can be discussed for suitable product designs.
For a quotation, provide the required AC voltage, pole configuration, In and Imax ratings, preferred brand or label, estimated order quantity, and destination market. If you already have a datasheet or project specification, send it for model matching before ordering.
A Type 1 SPD is designed for applications requiring lightning-current protection, with its Type 1 performance evaluated using the 10/350 μs current waveform. A Type 2 SPD is designed for transient overvoltage protection in distribution systems and is commonly evaluated using the 8/20 μs discharge-current waveform. The correct combination depends on the installation's lightning exposure and protection design.
First identify whether the stated figure refers to In or Imax. These ratings describe different test conditions and should not be compared as though they were the same parameter. Selection should also consider Uc, Up, the supply configuration, expected surge exposure, and the requirements of the installation.
Not in every installation. The required backup protection depends on the SPD model, its declared short-circuit characteristics, the upstream protective device, and the installation design. Use a compatible SCB when the manufacturer's instructions or the applicable design require one; do not assume that any SCB or MCB is suitable for every SPD.
No. An AC SPD should not be substituted for a photovoltaic DC SPD. Solar DC circuits require devices specifically rated for the applicable DC voltage, polarity and circuit configuration, with suitable ratings for the PV application.
Yes, subject to model availability and technical confirmation. Standard configurations and logo printing can be discussed for qualifying orders. Housing or circuit changes require a separate engineering review, minimum order confirmation, and production schedule.
Whether you are sourcing standard Type 2 AC surge protection devices for distribution or specifying SPDs for an electrical project, the first step is to match the product ratings to the actual installation. Contact TU-SHAN Electric with your electrical requirements and order quantity to request model information, a quotation, and available OEM options.