The TZU5-C 20kA Type 2 AC Surge Protection Device provides transient overvoltage protection for low-voltage AC distribution systems. It handles a nominal discharge current (In) of 20kA and a maximum discharge current (Imax) of 40kA. Plug-in modules simplify replacement, while the visual status indicator and thermal disconnection mechanism help maintenance personnel check the device condition and identify when attention is needed.
The TZU-40 3P+NPE Type 2 AC Surge Protection Device is configured for three-phase 380V distribution systems, with a nominal discharge current (In) of 20kA and a maximum discharge current (Imax) of 40kA. Its four plug-in modules provide a practical setup for industrial and commercial power distribution, while individual thermal disconnection and visual fault indication help identify modules that need attention during inspection.
The TUZHAV 1P+NPE Type 2 AC Surge Protection Device is designed for single-phase 220V AC distribution systems. With In 20kA, Imax 40kA and Up ≤ 1.2kV, it features plug-in modules, thermal disconnection and visual fault indication.
The TU-SHAN Electric Type 2 AC Surge Protective Device 10kA 20kA is designed for AC power distribution systems where transient overvoltage protection is required. Its compact DIN rail design, built-in thermal disconnection and visual status window support installation and routine inspection in compatible electrical panels.
Type 2 protection for compatible AC distribution and branch circuits
1P+NPE configuration for suitable single-phase installations
MOV-based protection with built-in thermal disconnection
Visual status window for checking the device condition
35 mm DIN rail mounting for electrical distribution enclosures
The 20kA 3P+NPE Type 2 AC Surge Protector is designed for three-phase AC 380V distribution systems. Its four-module configuration provides L1-PE, L2-PE, L3-PE, and N-PE protection, with In of 10kA, Imax of 20kA, and a specified Up of ≤1.0kV. It supports 35mm DIN rail mounting.
The 1P+N-PE Type 2 AC Surge Protective Device 20kA is suited to single-phase 220V AC distribution, with protection paths from L to PE and N to PE. It has a nominal discharge current (In) of 10kA, a maximum discharge current (Imax) of 20kA and a voltage protection level (Up) of ≤1.0kV. Its plug-in design and 35 mm DIN rail mounting make it convenient to integrate into compatible distribution panels.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy