In large industrial distribution systems, selecting an SPD backup protector is part of the overall electrical design process. Project engineers need to consider the connected surge protective device, available cabinet space, system voltage, short-circuit conditions and maintenance requirements before approving a component for installation.
The 80kA SPD Surge Backup Protector for Type 2 Industrial Main Distribution Panels is intended for compatible Type 2 SPD installations in industrial main distribution panels, data center secondary distribution systems and other large-scale electrical projects. It provides backup protection for the connected SPD rather than acting as an independent surge-current discharge device.
For electrical contractors, panel builders and equipment distributors sourcing an 80kA SPD backup protector from a China manufacturer or supplier, the following information can help with preliminary product evaluation and project specification.
A suitable SPD backup protection device should be selected according to the electrical design and the technical requirements of the connected SPD. For large distribution panels, reviewing the following points before ordering can reduce specification mismatches and installation changes.
Confirm whether the project uses an AC 230V or 400V system. The stated voltage specification applies to the AC version. Any DC requirement needs a separately confirmed product rating.
Select from the stated 1P, 1P+N, 2P, 3P and 4P configurations according to the electrical system, grounding arrangement and connected SPD design.
Compare the prospective short-circuit current at the installation point with the backup protector's documented breaking capability and applicable operating conditions.
Check the connected SPD manufacturer's recommended backup protection. The 80kA designation must be interpreted using the product's specified rating definition and test conditions.
Check the available 35mm DIN rail space, pole arrangement, conductor routing and maintenance clearance before finalizing the distribution panel layout.
If the project requires centralized status monitoring, confirm whether the optional passive dry contact is suitable for the control system's input requirements.
The 80kA SPD backup protector uses a 35mm DIN rail mounting format for installation in compatible electrical distribution cabinets. Its stated single-pole dimensions are 18mm wide, 80mm high and 66mm deep. The actual space requirement depends on the selected pole configuration and wiring arrangement.
For panel builders preparing a new cabinet, the product dimensions can be used as a preliminary reference during layout planning. For retrofit projects, the existing rail position, wiring clearance and upstream protection arrangement should also be checked. A matching physical size does not by itself establish electrical compatibility.
The following table summarizes the available product information for preliminary engineering review. Project approval should be based on the datasheet and supporting documents for the exact model.
| Parameter | Specification |
|---|---|
| Product Name | 80kA SPD Surge Backup Protector |
| Intended Application | Backup protection for compatible Type 2 SPD |
| Rated System Voltage | AC 230V / 400V |
| DC Version | Optional; separate ratings require confirmation |
| Mounting Type | 35mm DIN rail |
| Pole Configurations | 1P / 1P+N / 2P / 3P / 4P |
| Housing Material | Flame-retardant PC |
| Status Indicator | Green: normal; red: fault or trip, subject to product marking |
| Remote Signaling | Optional passive dry contact |
| Operating Temperature | -40°C to +85°C |
| Protection Rating | IP20, for cabinet installation |
| Single-Pole Dimensions | 18mm W × 80mm H × 66mm D |
| Module Width | 1 module per pole |
| Standards Reference | GB/T 33588.3 and applicable IEC 61643 requirements; exact scope and edition require confirmation |
This model is intended for project evaluation in distribution systems where a compatible Type 2 SPD is installed. Typical application environments include:
Secondary distribution panels serving factory production areas, industrial equipment and facility infrastructure.
Secondary distribution cabinets incorporating compatible SPDs, subject to the facility's electrical design and protection requirements.
Auxiliary power distribution cabinets where the selected product meets the project's electrical and documentation requirements.
Distribution systems serving workshops, commercial buildings and shared infrastructure facilities.
For an industrial project or data center procurement process, product selection is only one part of the approval procedure. The engineering team may also need to review model-specific technical information before adding the device to a bill of materials or equipment schedule.
Testing items such as insulation, dielectric withstand, operating performance, surge testing and environmental testing should only be treated as completed procedures when supported by the actual product records or reports.
Wenzhou Tush-An Electric Co., Ltd. was established in 2018 and focuses on low-voltage electrical protection products, including surge protection devices (SPD), surge protective device backup components (SCB) and miniature circuit breakers (MCB). The team brings more than 20 years of experience in the low-voltage electrical field.
The factory's production equipment includes glue filling, automatic welding and testing equipment. The company's stated overall production capacity is more than 3,000 units per day, with an approximate monthly output of 100,000 units. These figures refer to the company's overall production, not the confirmed output of this specific 80kA model.
As a China SPD manufacturer and supplier, TU-SHAN Electric serves customers in markets including the Middle East and South America. Relevant product standards referenced by the company include GB/T 18802.1 and IEC 61643-11. The applicable standard and supporting documents should be checked for each product model.
Buyers evaluating a long-term factory supply relationship can discuss product documentation, OEM branding, packaging and suitable customization requirements. Any changes to product construction or electrical specifications require separate technical confirmation.
Provide the connected SPD model, system voltage, grounding arrangement, required pole configuration and prospective short-circuit current. The 80kA rating definition and coordination requirements should also be checked against the product documentation.
Not necessarily. The meaning of the 80kA designation must be confirmed from the model-specific technical datasheet and test conditions. Do not use it as a substitute for the documented short-circuit breaking capability.
No universal compatibility should be assumed. Check the SPD manufacturer's recommended backup protection and verify the electrical coordination requirements for the proposed combination.
The stated mounting format is a 35mm DIN rail. The single-pole dimensions are 18mm W × 80mm H × 66mm D. Confirm the selected pole arrangement, wiring space and cabinet layout before installation.
The stated main voltage specification is AC 230V / 400V. A DC version is subject to separate rating confirmation. Do not apply the AC specifications to a DC circuit without the relevant product documentation.
An optional passive dry contact is specified. Its contact rating, signal logic and wiring requirements should be confirmed before connection to a building management or industrial monitoring system.
OEM branding and packaging can be discussed for suitable orders. Customization involving the product structure or electrical specifications requires technical review. Please provide the required changes and project quantity when requesting a quotation.
Request the datasheet and available model-specific technical documents first. Confirm the product configuration, applicable standards, sample availability, MOQ, lead time, warranty terms and packaging details with the supplier before order confirmation.
Planning an industrial distribution panel, data center electrical system or large-scale infrastructure project? Send us your connected SPD model, system voltage, required pole configuration and estimated quantity.
TU-SHAN Electric can review the available product configuration, provide applicable technical information and discuss supply requirements for your project.
Contact TU-SHAN Electric for Product DetailsAddress
No.51, Changjiang Road, Wenzhou Bridge Industrial Zone, Beibaixiang Town, Yueqing City, Zhejiang Province, China
Tel
