English
Products
100kA SPD Surge Backup Protector
  • 100kA SPD Surge Backup Protector100kA SPD Surge Backup Protector
  • 100kA SPD Surge Backup Protector100kA SPD Surge Backup Protector
  • 100kA SPD Surge Backup Protector100kA SPD Surge Backup Protector
  • 100kA SPD Surge Backup Protector100kA SPD Surge Backup Protector

100kA SPD Surge Backup Protector

The 100kA SPD Surge Backup Protector for Type 2 Heavy-Duty Incoming Distribution Systems is designed for high-capacity power distribution systems where surge protection requires a dedicated backup device. Available with multiple pole configurations, 35 mm DIN rail mounting, visual status indication and optional remote signaling, it can be configured for compatible Type 2 SPDs in industrial facilities, solar PV AC systems and transportation infrastructure.
    HEAVY-DUTY SPD BACKUP PROTECTION

    100kA SPD Surge Backup Protector for Type 2 Heavy-Duty Incoming Distribution Systems

    Designed for compatible Type 2 surge protective devices (SPD) installed in heavy-duty low-voltage distribution cabinets, this 100kA SPD Surge Backup Protector provides dedicated backup protection under specified fault conditions. As a China-based low-voltage electrical protection product supplier, TU-SHAN Electric supports distributors, importers and project buyers with product selection and OEM cooperation.

    100kA Product Rating 35mm DIN Rail 1P / 1P+N / 2P / 3P / 4P AC 230V / 400V
    100kA Specified Product Rating
    35mm DIN Rail Mounting
    5 Options Pole Configurations
    -40°C to +85°C Operating Temperature

    Backup Protection for Heavy-Duty SPD Installations

    In large industrial parks and major facilities, incoming distribution systems may supply multiple buildings, production areas and extensive electrical loads. Selecting an appropriate SPD backup protector is an important part of the overall surge protection design.

    The 100kA SPD Surge Backup Protector for Type 2 Heavy-Duty Incoming Distribution Systems is intended to work with compatible Type 2 SPDs. When an SPD develops an abnormal fault requiring disconnection, the backup protector helps isolate the faulty device from the electrical system.

    Unlike a surge protective device, the backup protector does not independently discharge lightning current. Its function is to provide dedicated backup protection for the connected SPD.

    Buyers comparing a Type 2 SPD backup protector supplier in China should evaluate compatibility, electrical specifications and supporting technical documentation rather than relying on the 100kA marking alone.

    Explore our Surge Protective Devices for the main surge protection function and related low-voltage protection products.

    Front view of a 100kA SPD surge backup protector for Type 2 distribution cabinets

    Key Features and Configuration Options

    01 / INSTALLATION

    35mm DIN Rail Mounting

    The modular installation format supports mounting on compatible 35mm DIN rails. Each pole occupies one module, with an 18mm single-pole width for distribution cabinet planning.

    02 / POLE SELECTION

    Multiple Pole Configurations

    Available configurations include 1P, 1P+N, 2P, 3P and 4P. Buyers can discuss the required configuration and application details with our sales team before ordering.

    03 / STATUS MONITORING

    Visual Status Indication

    The specified indicator uses green for normal status and red for fault or trip, subject to the actual product marking. An optional passive dry contact is specified for remote status monitoring.

    04 / VOLTAGE OPTIONS

    AC and DC Version Selection

    The stated AC ratings are 230V / 400V. A DC version may be available by request, but its voltage rating and performance require separate technical confirmation.

    05 / HOUSING

    Flame-Retardant PC Housing

    The specified housing material is flame-retardant PC. The IP20 protection rating is intended for installation inside suitable electrical cabinets.

    06 / ENVIRONMENT

    Wide Operating Temperature

    The specified operating temperature range is -40°C to +85°C. Actual installation conditions and the complete system design should be reviewed before selection.

    Detailed housing and modular structure of the Type 2 SPD backup protection device
    Product structure and configuration
    DIN rail installation format of the 100kA surge backup protector
    DIN rail installation design
    Important AC/DC Selection Notice

    The stated 230V / 400V ratings apply to the AC version. Do not install an AC-rated backup protector in a DC circuit unless the specific DC version has been technically confirmed and its documentation explicitly permits that application.

    Technical Specifications

    Review the following specifications when evaluating this 100kA Type 2 SPD backup protector for a distribution cabinet or electrical project.

    Parameter Specification
    Product Name 100kA SPD Surge Backup Protector
    Intended SPD Application Compatible Type 2 SPD
    Rated System Voltage AC 230V / 400V
    DC Version Optional; separate technical confirmation required
    Mounting 35mm DIN Rail
    Pole Options 1P / 1P+N / 2P / 3P / 4P
    Housing Material Flame-Retardant PC
    Status Indicator Green: Normal; Red: Fault or Trip, subject to product marking
    Remote Signaling Optional Passive Dry Contact
    Operating Temperature -40°C to +85°C
    Protection Rating IP20, for cabinet installation
    Single-Pole Dimensions 18mm W × 80mm H × 66mm D
    Module Width 1 Module per Pole
    Standards Reference GB/T 33588.3 and applicable IEC 61643 requirements; exact scope and edition to be verified

    Note: Confirm the exact model, electrical ratings, applicable standards and technical documentation before project approval. The 100kA marking alone does not establish compatibility with every 100kA SPD.

    How to Select the Right SPD Backup Protector

    Selecting a backup protector for a heavy-duty incoming distribution system requires more than checking the nominal current marking. The connected SPD, system fault conditions and installation arrangement must all be considered.

    Confirm the Connected SPD Provide the exact SPD model, electrical ratings and manufacturer's recommended backup protection.
    Check Surge Coordination Verify performance under the relevant surge waveform and current conditions for the SPD.
    Evaluate Short-Circuit Conditions Check the prospective short-circuit current and the applicable breaking capability.
    Verify Follow-Current Interruption Review the specified performance when an SPD fault results in power-frequency follow current.
    Match System Configuration Confirm rated voltage, pole arrangement and grounding method.
    Review Cabinet Integration Check DIN rail space, conductor sizing, terminals and installation clearances.
    Confirm Remote Signaling Check auxiliary contact ratings, signal logic and wiring if centralized monitoring is required.
    Review Installation Requirements Follow the manufacturer's instructions and applicable electrical regulations. Installation must be performed by qualified personnel.

    Typical Applications in Large Electrical Projects

    This 100kA SPD Surge Backup Protector may be considered for compatible Type 2 SPD installations in the following applications, subject to project-specific electrical evaluation.

    Industrial Parks Main incoming distribution cabinets serving multiple buildings and production areas.
    Solar PV Facilities Compatible SPD installations on the AC distribution side.
    Transportation Hubs Distribution cabinets serving station facilities and auxiliary infrastructure.
    Commercial Complexes Main power distribution systems requiring coordinated surge protection.
    Project Configuration Matters

    The backup protector is one component of a complete electrical protection arrangement. Its suitability depends on the connected SPD, upstream protective devices, available fault current, installation position and project requirements.

    China SPD Manufacturer and Factory Support

    Wenzhou Tush-An Electric Co.,Ltd. was established in 2018 and is based in Wenzhou, Zhejiang, China. Supported by a manufacturing and technical team with more than 20 years of experience in low-voltage electrical products, we focus on the development and supply of surge protective devices (SPD), surge backup protectors (SCB) and miniature circuit breakers (MCB).

    As a China-based electrical protection manufacturer and factory supplier, TU-SHAN Electric works with overseas distributors, importers and engineering companies. Our production facility is equipped with glue filling, automatic welding and testing machines to support manufacturing, assembly and product inspection.

    2018 Company Established
    3,000+ Units Daily Capacity
    100,000 Approximate Monthly Capacity

    Our production processes include welding, glue filling, assembly and testing. These operations support our approach to product quality and batch consistency. Relevant surge protection products are manufactured with reference to applicable standards, including GB/T 18802.1 and IEC 61643-11. Specific standards, testing records and certificates must be confirmed for the exact product model.

    For suitable orders, buyers can discuss OEM branding, packaging and available product configuration options with our team. Pole selection, remote signaling requirements and other technical details should be confirmed before production.

    We mainly serve overseas markets in the Middle East and South America, supporting distributors, electrical product importers and project buyers seeking an experienced low-voltage electrical protection supplier in China.

    Technical Documentation and Project Verification

    For a heavy-duty distribution project, technical documentation should correspond to the exact product model and selected configuration. Before approval or procurement, buyers can request available documents for evaluation.

    Product Datasheet

    Confirm the rated voltage, pole configuration, dimensions and applicable product specifications.

    Testing and Compliance

    Check available type-test reports, electrical performance data and applicable conformity evidence for the selected model.

    Installation Information

    Review available installation instructions, terminal requirements and auxiliary contact information.

    If your project requires customized branding, packaging or a particular configuration, provide the relevant requirements during the inquiry stage. Our team can review the request and confirm what can be supplied for the selected model.

    Sample availability, MOQ, warranty terms and delivery schedules can also be confirmed during quotation according to the selected model and order requirements.

    Frequently Asked Questions About 100kA SPD Backup Protectors

    What is a 100kA SPD Surge Backup Protector used for?

    It is designed to provide backup protection for a compatible surge protective device under specified fault conditions. When the connected SPD develops an abnormal fault requiring disconnection, the backup protector helps isolate the faulty SPD from the electrical system.

    Can an SPD backup protector replace a surge protective device?

    No. An SPD backup protector and an SPD perform different functions. The SPD limits transient overvoltage and diverts surge current, while the backup protector provides dedicated backup protection for the SPD.

    Is this 100kA backup protector compatible with every Type 2 SPD?

    No. Compatibility must be confirmed using the connected SPD model, electrical ratings, recommended backup protection, surge coordination requirements and applicable fault-interruption conditions. A 100kA marking alone does not guarantee compatibility.

    What pole configurations are available?

    The specified options include 1P, 1P+N, 2P, 3P and 4P. The correct selection depends on the distribution system, grounding arrangement and connected SPD configuration.

    Can the 230V / 400V AC version be used in a solar PV DC system?

    The AC version should not be assumed suitable for DC applications. A DC version may be available by request, but its voltage rating, performance and suitability must be separately confirmed before use.

    Does the product support remote monitoring?

    An optional passive dry contact is specified for remote status signaling. Confirm the auxiliary contact rating, signal logic and wiring requirements before connecting it to a centralized monitoring system.

    How is the 100kA SPD backup protector installed?

    The specified mounting format is a 35mm DIN rail. Installation space, wiring, conductor sizing, terminal requirements and electrical clearances should be checked against the actual cabinet design and product instructions. Qualified electrical personnel should perform installation.

    Can I request OEM branding or customized packaging?

    OEM branding and packaging can be discussed for suitable orders. Please provide your branding requirements, estimated quantity and preferred configuration so that availability can be confirmed before ordering.

    How can I select a suitable SPD backup protector supplier in China?

    Compare the supplier's product specifications, manufacturing background, available production and testing equipment, technical documentation and communication support. Buyers should also confirm product compatibility and applicable standards for their specific electrical project.

    What information should I provide when requesting a quotation?

    Please provide the connected SPD model, system voltage, required pole configuration, intended application, estimated order quantity and any remote signaling or OEM branding requirements. This information helps us review the configuration and confirm available technical documents and quotation details.

    Looking for a China SPD Manufacturer for Your Next Project?

    Contact TU-SHAN Electric for information about the 100kA SPD Surge Backup Protector. Share your connected SPD datasheet, system voltage, pole configuration and estimated quantity. Our team can review your application requirements and confirm available product configurations, technical documentation and OEM cooperation options.

    Explore SPD Products & Request Product Information
    Send Inquiry
    Contact Info
    Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept