The 15kA SPD Surge Backup Protector for Type 1 Surge Protection Systemshelps disconnect a faulty SPD branch under specified operating conditions. It features 35mm DIN rail mounting, multiple pole options, visual status indication and optional remote fault signaling. AC versions are available, with DC options subject to specification confirmation.
The 15kA SPD surge backup protector disconnects a faulty SPD branch under specified operating conditions, protecting the wider distribution system from a power-frequency fault. It mounts on a standard 35mm DIN rail and fits building entrance panels, small industrial cabinets and telecom power systems. TU-SHAN Electric is a China-based manufacturer of this SPD backup protector; every unit is routine-tested before shipment, and housing material, trip performance and marking are controlled in our own factory so quality stays consistent across repeat orders. We customize product marking and packaging for project requirements.
Its compact modular design suits installations where space is limited. Available in 1P, 1P+N, 2P, 3P and 4P configurations, it supports different circuit arrangements. An optional auxiliary dry contact can transmit trip status to a compatible monitoring system, helping maintenance staff identify a device that needs inspection.
Before selection, confirm compatibility with the connected Type 1 SPD, including surge-current coordination, follow-current interruption capability, system voltage and short-circuit conditions. The protector does not discharge lightning current independently and must not be treated as a replacement for an SPD.
15kA NominalType 1 SPD Compatible35mm DIN Rail1P – 4P OptionsOptional Dry ContactOEM Available
Key Features and Benefits
01
Coordinated Backup Protection
Isolates a compatible Type 1 SPD when a qualifying power-frequency fault occurs.
02
Compact Installation
Standard 35mm DIN rail mounting, with a single-pole width of only 18mm.
03
Flexible Configurations
Available in 1P, 1P+N, 2P, 3P and 4P versions for single-phase and three-phase systems.
04
Optional Remote Signaling
A potential-free dry contact for compatible alarm and monitoring systems.
05
AC / DC Selection
AC 230V / 400V specifications; DC versions subject to confirmation of required ratings.
06
OEM Marking & Packaging
Custom product marking and packaging are available for project requirements.
Front view — modular 18mm single-pole design with status windowSide profile — 35mm DIN rail clip for panel and cabinet installation
Technical Specifications
Item
Specification
Product Name
15kA SPD Surge Backup Protector
Compatible SPD
Type 1 SPD; confirm model-specific coordination
Rated Operating Voltage
AC 230V / 400V
DC Version
Optional; specifications to be confirmed
Pole Configurations
1P / 1P+N / 2P / 3P / 4P
Mounting
35mm DIN rail
Single-Pole Dimensions
18 × 80 × 66mm (W × H × D)
Housing Material
Flame-retardant PC, as specified
Status Indication
Green for normal status; red for fault / trip status, subject to final product marking
Auxiliary Contact
Optional potential-free dry contact
Operating Temperature
-40°C to +85°C, as specified
Protection Degree
IP20; for installation inside an appropriate enclosure
Referenced Standards
GB/T 33588.3 and IEC 61643; applicable parts and conformity to be verified
Not sure which rating matches your SPD?Send us the SPD model, system voltage, AC or DC application and pole count — we will confirm coordination and reply with a quotation.
Final suitability depends on the electrical system design, the connected SPD and the product's verified ratings.
Packing and Delivery
Each 15kA SPD surge backup protector ships in a neutral inner box or a customized box. The inner box measures 220 × 96 × 73mm and holds 12 pieces for 1P, 6 for 2P, 4 for 3P or 3 for 4P. Outer cartons use five-layer corrugated board and measure 505 × 310 × 235mm. This export packing is designed to protect units during handling, so they arrive in the same condition they left our production line.
Selection and Technical Confirmation
To confirm the right configuration, provide the connected SPD model, system voltage, AC or DC application, required pole count and any remote monitoring requirements. Review the relevant datasheet and applicable test documentation before project approval.
The 15kA SPD backup protector should be selected as part of a coordinated protection arrangement, not on the basis of the nominal 15kA designation alone. Confirm the applicable surge waveform, follow-current interruption performance, short-circuit conditions and relevant standards for the exact model. As a China-based supplier, TU-SHAN Electric can provide datasheets, samples and OEM marking options so you can verify fit before placing a production order.
Installed inside a service entrance distribution panelPole configurations and terminal detail for quick wiring
FAQ
What is a 15kA SPD surge backup protector?
It is a coordinated backup disconnection device installed upstream of a Type 1 SPD. When the SPD reaches the end of its service life and a power-frequency fault occurs, the protector isolates the faulty branch so the rest of the surge protection device arrangement and the supply are not unnecessarily interrupted.
Can this protector replace an SPD?
No. It does not discharge lightning or switching surge current. It only provides backup disconnection and must be used together with a compatible Type 1 SPD.
Which pole configurations are available?
1P, 1P+N, 2P, 3P and 4P. The single-pole width is 18mm, so a 4P version occupies 72mm of DIN rail space.
Is a DC version available for photovoltaic systems?
Yes. DC-rated versions can be supplied after the system voltage, pole count and coordination requirements are confirmed. Related products include solar DC surge protection devices.
Does it support remote monitoring?
An optional potential-free dry contact provides trip-status signaling to compatible alarm or monitoring systems, so maintenance staff can identify a device that needs inspection.
How do I choose between the 15kA, 25kA and 40kA versions?
Yes. TU-SHAN Electric can provide datasheets, samples and OEM marking and packaging options. Send your requirements and our team will reply with details.
Ready to verify fit for your project?Share your application details and we will confirm the correct 15kA SPD surge backup protector configuration, documentation and delivery schedule.
Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy