In commercial buildings, industrial facilities and public electrical installations, a surge protective device (SPD) needs suitable backup protection to help manage abnormal fault conditions. Without proper coordination, an SPD fault can affect the connected distribution circuit and the continuity of electrical protection.
The 40kA SPD Surge Backup Protector is designed for use with compatible Type 2 SPDs in low-voltage AC distribution systems. It can be considered for secondary distribution boards in offices, shopping centres, hotels, factories, communication facilities and industrial parks.
With AC 230/400V system specifications, several pole configurations and 35mm DIN rail mounting, this product provides configuration options for different distribution panel designs. An optional passive dry contact is also specified for installations requiring remote status signalling.
Product function: the backup protector works with a compatible SPD to disconnect the affected protection branch under specified fault conditions. It does not independently discharge lightning current.
An SCB (surge backup protector) is the coordination device between an SPD and the upstream protective device. Where an SPD reaches the end of its service life or a fault develops, the backup protector operates to isolate the affected branch, helping to protect the distribution circuit and keep the rest of the installation in service.
This unit is rated for AC 230/400V low-voltage distribution systems, uses flame-retardant PC housing material, and carries a green / red status indicator so maintenance staff can check operating condition at a glance. Selected models can be specified with a passive dry contact for remote monitoring.
This 40kA SPD Surge Backup Protector is intended for secondary distribution systems where a compatible Type 2 AC surge protection device is installed. Typical applications include:
Commercial buildings: secondary distribution boards in offices, shopping centres, retail facilities and commercial complexes.
Hotels and public buildings: electrical distribution cabinets serving lighting, air conditioning, public areas and auxiliary equipment.
Industrial factories: low-voltage distribution panels supplying production areas, workshop equipment and auxiliary circuits.
Communication facilities: power distribution cabinets in communication base stations, equipment rooms and related infrastructure.
Industrial parks: secondary power distribution systems serving production buildings, offices and shared facilities.
Equipment rooms: distribution panels supplying control equipment, monitoring systems and other electrical installations.
The final configuration must follow the SPD manufacturer's backup protection recommendations and the electrical design of the installation. A 40kA designation alone does not establish compatibility with every Type 2 SPD.
The following table summarises the currently specified configuration options for this 40kA SPD backup protector. Confirm the exact model and ratings before placing an order.
| Item | Available Specification |
|---|---|
| Product Type | 40kA SPD Surge Backup Protector |
| Intended Application | Compatible Type 2 SPD systems |
| Rated System Voltage | AC 230/400V |
| DC Version | Optional; separate voltage and application ratings to be confirmed |
| Pole Configuration | 1P / 1P+N / 2P / 3P / 4P |
| Mounting | 35mm DIN rail |
| Housing Material | Flame-retardant PC |
| Status Indication | Green: normal; red: fault or trip, subject to product marking |
| Remote Signaling | Optional passive dry contact |
| Operating Temperature | -40°C to +85°C |
| Protection Rating | IP20, for cabinet installation |
| Single-Pole Dimensions | 18mm W × 80mm H × 66mm D |
| Module Width | 1 module per pole |
| Standards Reference | GB/T 33588.3 and applicable IEC 61643 requirements; exact edition and applicability to be confirmed |
| OEM Options | Branding and packaging arrangements can be discussed |
Export packing is an important part of any bulk order. Each protector is packed in a neutral paper box or a customised printed box, and the inner boxes are then consolidated into five-layer corrugated outer cartons. The carton layout is designed to keep the modular units secure during container and LCL shipments.
| Packing Item | Specification |
|---|---|
| Packing method | Carton packing |
| Inner packing | Neutral paper box or customised box |
| Inner box size | 220 × 96 × 73 mm |
| Quantity per inner box | 1P: 12 pcs | 2P: 6 pcs | 3P: 4 pcs | 4P: 3 pcs |
| Outer carton type | Corrugated carton |
| Outer carton size | 505 × 310 × 235 mm |
| Outer carton material | Five-layer corrugated board |
The inner-box quantity differs by pole version because the modules are arranged side by side. Distributors planning wholesale or container orders can request a packing list and container loading estimate before confirming the purchase order. Customised inner box printing can be discussed together with OEM branding requests.
Buying in bulk or sourcing a private-label SCB?
Tell us your pole configuration, order quantity and destination port, and our sales team will confirm the packing plan, MOQ and delivery schedule.
Request a Bulk QuotePanel space, wiring arrangements and maintenance access are important considerations when selecting an SPD backup protector. This product uses a 35mm DIN rail mounting format for installation in compatible low-voltage distribution cabinets, alongside surge protection devices, miniature circuit breakers and distribution boxes.
Compact module arrangement: the specified single-pole width is 18mm, with one module per pole. Total installation space depends on the selected configuration.
Flexible pole selection: the 1P, 1P+N, 2P, 3P and 4P options cover different distribution arrangements. Select the appropriate version according to the AC system configuration and grounding method.
Visual status reference: green and red indicators provide a visual reference for checking operating status. The exact indication and its meaning should follow the product label and instruction manual.
Remote signaling option: selected configurations can be specified with a passive dry contact for compatible monitoring systems. Contact ratings, wiring and signal logic must be confirmed before connection.
For solar photovoltaic projects, an AC-rated version must not be assumed suitable for DC circuits. A separate DC version requires its own confirmed electrical ratings and application documentation. Larger installations may also compare this model with the 80kA SPD Surge Backup Protector or the 100kA version.
Choosing a backup protector involves more than matching the rated current shown on an SPD label. The two protection devices must be suitable for the same electrical installation and operate according to their specified coordination requirements.
Before requesting a quotation, prepare the following information:
These details help our sales and technical team review the appropriate product configuration. Final selection should be supported by the applicable coordination and performance documentation.
Before installation, check the product marking, rated voltage, pole arrangement and compatibility with the connected SPD. The backup protector must be installed according to the manufacturer's wiring instructions and the electrical design of the distribution system.
For engineering approval and distributor evaluation, the following information should be reviewed:
AC and DC versions must be evaluated separately. Installation should be performed by qualified electrical personnel after safely isolating the circuit and following applicable electrical regulations.
Wenzhou Tush-An Electric Co., Ltd. was established in 2018 in China, supported by a manufacturing team with more than 20 years of experience in low-voltage electrical products. We specialise in surge protective devices (SPD), surge backup protectors (SCB), miniature circuit breakers (MCB) and related distribution protection products.
Our factory is equipped with one glue filling machine, two automatic welding machines and two testing machines. The current overall production capacity exceeds 3,000 units per day, with approximately 100,000 units per month. The team includes more than 10 employees, including two technical personnel.
These production resources support regular distributor orders, bulk purchasing and suitable OEM projects. Our manufacturing processes cover key operations such as welding, glue filling, assembly and testing. Production and inspection arrangements are used to maintain consistency across batches.
As an experienced low-voltage electrical protection supplier, TU-SHAN Electric works with overseas distributors, importers and engineering customers, particularly in the Middle East and South America. We provide product specification information, quotation assistance and basic technical communication to support purchasing and project evaluation.
Product quality depends on suitable component selection, manufacturing processes and inspection procedures. At TU-SHAN Electric, our production equipment supports key manufacturing operations, while testing equipment is used within our production and inspection processes.
Relevant surge protection products are manufactured with reference to applicable industry standards, including GB/T 18802.1 and IEC 61643-11, according to their product scope. For this specific 40kA backup protector, the applicable standards, test reports and conformity documents should be confirmed against the exact model.
For distributors and project buyers, we can discuss OEM branding, packaging and suitable customisation requirements. Any requested product or configuration changes need to be reviewed before order confirmation to establish their technical feasibility and applicable specifications.
Sample availability, order quantities, warranty terms and production lead times can be confirmed according to the selected model and order requirements.
No. Compatibility depends on the connected SPD's rated parameters, manufacturer's backup protection recommendations, prospective short-circuit current and coordination performance. The 40kA designation alone cannot confirm that two devices are compatible.
A DC version can be discussed as an optional configuration. Its rated DC voltage, circuit arrangement and performance requirements must be confirmed separately. The AC 230/400V version should not be used on DC circuits without explicit product approval.
The specified configurations include 1P, 1P+N, 2P, 3P and 4P. The correct option depends on the distribution system, grounding arrangement and connected SPD.
An optional passive dry-contact configuration is specified for selected versions. Confirm the contact rating, wiring configuration and signal logic before connecting it to a SCADA or other monitoring system.
The stated enclosure protection rating is IP20, which is intended for installation inside a suitable electrical cabinet. It should not be treated as an outdoor weatherproof device.
Each unit is packed in a neutral or customised paper box measuring 220 × 96 × 73 mm. Quantities per inner box are 12 pcs for 1P, 6 pcs for 2P, 4 pcs for 3P and 3 pcs for 4P. Inner boxes are consolidated into five-layer corrugated cartons of 505 × 310 × 235 mm.
Request the exact model datasheet, installation instructions and available test or conformity documents. The current rating definition, applicable standard edition and coordination performance should be checked before technical approval.
Yes. OEM branding and packaging requirements can be discussed for suitable orders. Customisation details, sample availability, order quantity and production arrangements should be confirmed with our team before ordering.
If you are sourcing a 40kA SPD Surge Backup Protector for commercial distribution panels, industrial facilities or other Type 2 SPD installations, send us your electrical system details for product evaluation.
Please include the connected SPD model, AC system voltage, required pole configuration, application and estimated quantity. TU-SHAN Electric can assist with specification confirmation, available technical documentation and quotation preparation.
Contact our team to discuss distributor supply, project purchasing and OEM cooperation.
Ready to compare specifications and price?
Send your requirements now — our team typically replies with a quotation and datasheet within one business day.
Send Inquiry NowAddress
No.51, Changjiang Road, Wenzhou Bridge Industrial Zone, Beibaixiang Town, Yueqing City, Zhejiang Province, China
Tel
