English
Products
40kA Type 2 Surge Protection Device
  • 40kA Type 2 Surge Protection Device40kA Type 2 Surge Protection Device
  • 40kA Type 2 Surge Protection Device40kA Type 2 Surge Protection Device
  • 40kA Type 2 Surge Protection Device40kA Type 2 Surge Protection Device
  • 40kA Type 2 Surge Protection Device40kA Type 2 Surge Protection Device

40kA Type 2 Surge Protection Device

The TZU2-80B 40kA Type 2 Surge Protection Device is designed for low-voltage AC distribution systems exposed to high surge currents. With a nominal discharge current (In) of 40kA and a maximum discharge current (Imax) of 80kA, it provides surge protection for industrial distribution boards, commercial buildings and photovoltaic AC distribution cabinets. Its plug-in module design, visual status indicator and integrated thermal disconnection support inspection and module replacement during maintenance.

The TU-SHAN Electric TZU2-80B is a 40kA Type 2 Surge Protection Device designed for low-voltage AC distribution systems exposed to induced lightning surges and switching transients.

With a stated 40kA nominal discharge current (In) and 80kA maximum discharge current (Imax), it is suited to projects requiring a higher stated Type 2 surge-current rating. Its plug-in modules, visual status window and 35mm DIN rail mounting simplify installation and routine maintenance.

Available in 1P, 1P+N, 2P, 3P and 4P configurations, the series can be evaluated for different distribution arrangements. Confirm the exact electrical ratings and configuration before ordering.

TUZHAN Electric TZU2-80B AC surge protection device with plug-in modules
40kANominal discharge current
80kAMaximum discharge current
IP20Stated enclosure rating
35mmDIN rail mounting

Designed for Practical Installation and Maintenance

High Surge-Current Rating

The stated In of 40kA and Imax of 80kA, measured using the 8/20μs waveform, support selection for distribution points requiring higher surge-current capacity. Suitability depends on the site's exposure and protection design.

Replaceable Plug-In Modules

Individual modules can be removed for replacement without removing the complete base assembly. This can simplify servicing in distribution cabinets and industrial control panels.

Front Status Window

The visual indicator allows maintenance personnel to check the module's indicated condition. Refer to the product markings and instructions to identify the status and determine when replacement is required.

Integrated Thermal Disconnection

The built-in mechanism is designed to disconnect a protection element under specified deterioration conditions. Appropriate upstream backup protection must still be selected according to the manufacturer's instructions.

Technical Specifications

Parameter Specification
Brand TU-SHAN Electric
Model TZU2-80B
Product type Type 2 AC Surge Protection Device
Maximum continuous operating voltage (Uc) Approximately 275V AC; confirm the rating for the selected protection mode
Nominal discharge current (In) 40kA (8/20μs)
Maximum discharge current (Imax) 80kA (8/20μs)
Voltage protection level (Up) ≤1.6kV, subject to confirmation against the applicable test report
Protection rating IP20
Module width 18mm
Module dimensions 90 × 18 × 66mm
Mounting 35mm DIN rail
Module design Plug-in
Status indication Visual status window
Disconnection mechanism Integrated thermal disconnection
Pole configurations 1P, 1P+N, 2P, 3P and 4P

Electrical ratings, dimensions and available configurations should be verified against the final datasheet for the exact model before project approval or bulk purchasing.

Where Can This AC SPD Be Used?

The TZU2-80B 40kA Type 2 Surge Protection Device can be evaluated for the following applications when its ratings match the electrical design.

Industrial Distribution Distribution boards, control cabinets and power systems exposed to induced surges or switching transients.
Solar PV AC Side AC distribution associated with photovoltaic inverters. PV DC circuits require a separately specified DC-rated SPD.
Commercial Buildings Electrical distribution in commercial facilities, public buildings and large premises requiring coordinated surge protection.
Transport Infrastructure Power distribution for traffic monitoring systems, tunnels and related infrastructure installations.
Communication Rooms AC supply distribution for communication equipment and associated control systems.
Industrial Equipment Power supply circuits serving automation and control equipment, with downstream protection where required.

How to Select the Correct Configuration

Check the supply voltage and earthing system. The Uc rating must suit the actual supply and connection mode. Do not assume all pole configurations share identical ratings.

Confirm the required protection stage. Type 2 SPDs are generally used against induced lightning surges and switching transients. Installations requiring protection against partial direct lightning currents may need a suitable Type 1 or Type 1+2 SPD.

Check Up and backup protection. Verify the voltage protection level against the protected equipment's withstand requirements, and follow the manufacturer's coordination instructions for the upstream fuse or circuit breaker.

Plan the installation. Keep connecting conductors short, provide suitable earthing and bonding, and coordinate SPDs at different distribution levels where necessary.

TZU2-80B vs. TZU5-B 30kA

Both models should be selected according to the project's protection requirements. The main stated difference is their discharge-current rating.

Comparison TZU2-80B TZU5-B 30kA
Nominal discharge current (In) 40kA 30kA
Maximum discharge current (Imax) 80kA 60kA
Selection consideration Higher stated surge-current rating Suitable where the 30kA nominal rating meets the design
Before ordering Compare Uc, Up, pole configuration, dimensions, backup protection requirements and applicable test documentation.
A higher discharge-current rating does not automatically mean longer service life or better protection in every installation. Select the SPD based on the complete electrical design, not one parameter alone.

Factory Supply and OEM Options

TU-SHAN Electric is the brand of WENZHOU TUSH-AN ELECTRIC CO., LTD, established in 2018. The company manufactures low-voltage electrical protection products, including SPDs, surge backup protectors (SCBs) and miniature circuit breakers (MCBs), supported by a team with more than 20 years of industry experience.

For distributors, electrical contractors and project buyers, the TZU2-80B 40kA Type 2 Surge Protection Device can be discussed alongside other models to match different protection positions within a project.

Standard MOQGenerally 50 units per model
Sample Orders1–10 units may be available; freight paid by the customer
OEM LogoGenerally available from 200 units
Housing or Circuit ChangesGenerally considered from 1,000 units, subject to technical review
Stock Orders50–500 units may ship in approximately 3–7 days when stock is available
Batch Orders500–5,000 units generally require approximately 7–15 days
OEM Lead TimeLogo orders generally require approximately 12–18 days
Export TermsFOB Ningbo/Wenzhou, CIF and door-to-door air freight can be discussed

MOQ, stock, lead time and customization options are subject to confirmation. For a quotation, provide the required configuration, quantity, operating voltage, destination country and documentation requirements.

Technical Documents and Quality Checks

Before approving a model for a project, request the applicable datasheet, installation instructions and available test or qualification documents. Confirm In, Imax, Up, Uc, pole configuration and enclosure rating against the exact product supplied.

Standard references alone do not establish third-party certification. The applicable standard editions and supporting documents should be verified during technical evaluation.

Frequently Asked Questions

Is the TZU2-80B a Type 1 or Type 2 SPD?

It is specified as a Type 2 AC SPD for suitable low-voltage distribution applications. Where Type 1 protection is required, select a suitably rated Type 1 or Type 1+2 device according to the lightning protection design.

Can it be installed on the DC side of a solar system?

No, not as a standard AC-rated unit. The PV DC side requires an SPD specifically rated for the system's DC voltage and application.

Does the SPD need upstream backup protection?

Appropriate backup protection may be required. Select the fuse or circuit breaker according to the manufacturer's coordination instructions and the installation design.

Can I order a customized version?

OEM logo options and certain housing or circuit modifications can be discussed, subject to minimum quantities and technical review. Confirm feasibility and lead time before placing an order.

What information is needed for a quotation?

Provide the pole configuration, rated system voltage, quantity, destination country, OEM requirements and any project-specific documentation needs. This helps confirm model suitability, availability and pricing.

Request a Quote

Looking for a 40kA Type 2 Surge Protection Device for distribution cabinets or an electrical project? Contact TU-SHAN Electric with your required specifications and quantity to discuss model selection, OEM options and delivery arrangements.

For faster evaluation, include your system voltage, pole configuration, order quantity and destination.

Send an Inquiry
Send Inquiry
Contact Info
Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept