English
Products
40A Miniature Circuit Breaker
  • 40A Miniature Circuit Breaker40A Miniature Circuit Breaker
  • 40A Miniature Circuit Breaker40A Miniature Circuit Breaker
  • 40A Miniature Circuit Breaker40A Miniature Circuit Breaker
  • 40A Miniature Circuit Breaker40A Miniature Circuit Breaker

40A Miniature Circuit Breaker

The 40A Miniature Circuit Breaker (MCB) suits branch feeder circuits in low-voltage distribution panels for lighting, socket and small-power loads. C- and D-curve versions offer thermal-magnetic protection and 35mm DIN-rail mounting, giving flexible panel layouts for commercial and light-industrial installations.
    Branch feeder protection

    A branch feeder feeding several downstream lighting, socket and small-power circuits has to be protected against both overload and short circuit — without cutting power to the whole panel when one outgoing circuit develops a fault.

    The 40A Miniature Circuit Breaker handles that in a single 18mm module. A thermal-magnetic mechanism clears sustained overcurrent and high fault current, with C curve as standard and D curve available where start-up current is higher. Pick 6kA or 10kA breaking capacity to suit the fault level at the panel, and set the pole count from your supply arrangement.

    Mounting is standard 35mm DIN rail in 1P, 1P+N, 2P, 3P and 4P, and a three-position handle shows on, off or tripped at a glance — useful when someone is fault-finding a panel. The housing is flame-retardant PC.

    40A miniature circuit breaker for low-voltage distribution panels
    40ARated current
    6kA / 10kABreaking capacity
    35mmDIN rail mounting
    1P–4PPole configurations
    40A miniature circuit breaker front view with trip-indicating handle
    40A MCB housing and external configuration

    Technical Specifications

    Product Type Miniature Circuit Breaker (MCB)
    Rated Current 40A
    Tripping Curve C curve standard; D curve optional
    Rated Voltage AC 230V / 400V; DC version available on request
    Breaking Capacity 6kA / 10kA options
    Pole Configurations 1P, 1P+N, 2P, 3P, 4P
    Mounting 35mm DIN rail
    Housing Material Flame-retardant PC
    Handle Indication Three-position handle with trip indication
    Operating Temperature -25°C to +70°C
    Protection Degree IP20; for installation inside a suitable enclosure
    Single-Pole Dimensions 18mm wide × 80mm high × 66mm deep
    Reference Standards IEC 60898-1, GB 10963.1

    Specifications vary by configuration. Confirm the voltage, breaking capacity, pole arrangement and applicable standard for the selected model before the design or purchase order is finalised.

    What a 40A Rating Actually Does

    A 40A rating does not mean the breaker trips the moment current passes 40A. The thermal release responds to sustained overcurrent over time, and the magnetic release only operates once fault current reaches the instantaneous threshold. What matters is that the time-current curve matches your load and your fault-protection requirement.

    In a secondary distribution panel a branch feeder may supply several downstream circuits. Whether this device suits that feeder depends on the combined load, the conductor capacity and the fault conditions — not on how many outgoing circuits there happen to be. Load calculation, conductor selection and protective-device coordination are assessed together, never on the current rating alone.

    Five Checks Before You Order

    Combined load

    Calculate the expected demand of the connected circuits, allowing for simultaneous operation and the demand factors that apply to the installation.

    Feeder cable capacity

    Check the conductor's permissible current after correction for installation method, ambient temperature, grouping, insulation and route length. Size alone does not confirm a cable is suitable.

    Prospective short-circuit current

    Match the 6kA or 10kA breaking capacity to the fault level at the installation point. The two options are not interchangeable without checking the circuit.

    Tripping curve

    Set the instantaneous magnetic threshold against the connected loads while keeping the fault-disconnection conditions the design requires.

    Poles and voltage

    Choose the number of poles from the supply arrangement, switching requirements and local electrical regulations — not from what is on the shelf.

    Coordination with the panel

    Check how the device sits between upstream protection, downstream breakers and any SPD, so the whole panel trips in the order the design intends.

    40A miniature circuit breaker for DIN-rail electrical panels
    40A MCB product detail for distribution applications

    C Curve vs. D Curve

    The two versions differ in their typical instantaneous magnetic tripping range. The correct choice depends on the load's inrush current and the fault current available at the installation point.

    Selection Factor C Curve D Curve
    Typical instantaneous magnetic tripping range 5–10 × rated current 10–20 × rated current
    Load characteristics Circuits with moderate inrush current Circuits with higher inrush current
    Selection considerations Load profile and fault-disconnection requirements Higher inrush current, available fault current and required disconnection conditions

    These are typical ranges under the relevant MCB standard, not a substitute for the exact model's published characteristics. A D-curve breaker is not automatically preferable for factory or commercial installations — its higher magnetic threshold may require closer attention to fault-loop conditions and disconnection times.

    Protection Coordination in Distribution Panels

    The branch feeder breaker works as part of a wider protection arrangement. Its relationship with upstream protection, downstream breakers and any surge protective device has to be considered during panel design.

    40A MCB Provides overload and short-circuit protection for the branch feeder within its rated characteristics.
    Downstream MCBs Protect individual terminal circuits according to their ratings and conductor requirements.
    Surge protective device Limits transient overvoltage as part of the specified surge protection arrangement.
    Upstream protective device Provides upstream protection and contributes to overall protective-device coordination.

    Installing a 40A device upstream of 16A or 20A terminal breakers does not automatically guarantee selective tripping. Selectivity depends on the time-current characteristics of both devices, the fault current and manufacturer-tested coordination data.

    An SPD performs a different function from an MCB and does not replace overcurrent protection. Where backup protection is required for the SPD, the protective device and its rating must follow the SPD manufacturer's instructions. The complete panel should also account for the distribution box layout, conductor sizing and the intended fault-isolation arrangement.

    Installation and Panel Compatibility

    Fits standard DIN rail

    The breaker mounts on standard 35mm DIN rail. Single-pole dimensions are 18mm wide, 80mm high and 66mm deep. Verify the dimensions and terminal arrangement of the selected pole version before the panel layout is finalised.

    With an IP20 rating, the device is intended for installation inside a suitable enclosure. Allow for ambient temperature, conductor routing, terminal connection and heat dissipation.

    Installed by a qualified professional

    Installation, conductor sizing and protective-device selection should be carried out by a qualified electrical professional in accordance with local regulations and the product's technical documentation.

    For panel builders, the full protection package can come from one place: MCBs, SPDs, SPD backup protectors and distribution boxes.

    Documentation for Approval and Site Handover

    Specify the model, and the paperwork follows it — not a generic sheet. Depending on what has been verified for the selected version, the package can include the product datasheet and rated characteristics, conformity declarations and certificates where available, electrical performance and trip-function test records, temperature-rise or short-circuit reports where applicable, and product identification and traceability information.

    Quality control covers incoming material checks, controlled assembly, calibration of the thermal and magnetic elements, and a routine trip test before packing. IEC 60898-1 and GB 10963.1 are listed as reference standards; their inclusion does not by itself establish third-party certification or prove that every configuration has been independently tested. Confirm the standard and supporting documents for the model you are buying.

    OEM Marking and Ordering

    OEM printing is supported for the 40A Miniature Circuit Breaker, so the cover, handle and packaging can carry your brand, part number and language set — send the artwork and tell us how you want the marking customized. Production runs in our China factory, and as a manufacturer covering MCBs, SPDs and distribution boxes, one supplier can handle the protection package for a panel project.

    Include the following in an inquiry: rated current and C/D curve, rated voltage and pole arrangement, required breaking capacity, intended application and panel requirements, target market and compliance documents, and logo artwork, label details and packaging requirements.

    Confirm MOQ, sample availability, lead time, warranty terms and the available document package for the actual model before ordering.

    Frequently Asked Questions

    How many downstream circuits can a 40A MCB supply?

    There is no fixed circuit count. The suitable number depends on the combined expected load, demand factors, feeder conductor capacity and coordination with downstream protective devices. The circuit design must satisfy the applicable current and fault-protection requirements.

    When should a C-curve or D-curve version be selected?

    A C curve may suit general distribution circuits with moderate inrush current. A D curve may be considered for loads with higher starting current, provided the available fault current and required disconnection conditions are also satisfied. Base the choice on the actual load and circuit calculations.

    Is 10mm² copper cable suitable for a 40A MCB?

    It may be suitable in some installations, but the conductor size cannot be confirmed from the breaker rating alone. Installation method, insulation type, ambient temperature, grouping, length, voltage drop and local wiring rules affect the permissible current. Verify the corrected conductor ampacity before selecting the feeder cable.

    Will the 40A feeder breaker trip before a downstream 16A or 20A MCB?

    Not necessarily. Selective tripping depends on the time-current characteristics of both devices, the fault current and any applicable manufacturer-tested coordination data. Different rated currents alone do not guarantee selectivity.

    Can this MCB be installed with a surge protective device?

    Yes, where the devices are compatible with the distribution system and the SPD manufacturer's installation requirements are met. Any required SPD backup overcurrent protection must be selected according to the SPD manufacturer's instructions.

    Is OEM branding available for the 40A MCB?

    OEM printing is supported. Confirm the required electrical configuration, logo artwork, minimum order quantity, sample arrangements, lead time and applicable market documentation before placing an order.

    Send the load, the fault level and the panel layout

    We will confirm the 40A Miniature Circuit Breaker configuration, curve and breaking capacity for your circuit, and reply with samples, pricing and lead time.

    Send Inquiry Now
    Send Inquiry
    Contact Info
    Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept