The 10A miniature circuit breaker is designed for lighting distribution circuits in commercial buildings, hotels, showrooms and LED strip installations. With a C-type trip curve option, thermal-magnetic protection and 35 mm DIN rail mounting, it supports branch circuit protection where LED driver inrush current must be considered during breaker selection.
LED driver inrush current is the hidden problem in lighting panels. Ten drivers switched on at once can pull a combined surge far above the steady-state load — and a breaker sized only on wattage trips every time the lights come on.
The 10A Miniature Circuit Breaker is built around that reality. C curve as standard, with B and D available when the driver profile calls for a different instantaneous range. Thermal-magnetic operation covers sustained overload and short circuit in one 18mm module, with 6kA or 10kA breaking capacity chosen against the fault level at the board.
Mounting is 35mm DIN rail in 1P, 1P+N, 2P, 3P and 4P. The housing is flame-retardant PC, and the three-position handle shows on, off or tripped.
Wattage alone does not size a lighting circuit. A 10A breaker on 230V corresponds to roughly 2,300VA — but the number of drivers, their peak inrush and the circuit impedance decide whether that branch actually holds. Get the driver data before the panel is drawn.
10ARated current
50–100AC curve magnetic trip
6kA / 10kABreaking capacity
1P–4PPole configurations
How to Size a 10A Miniature Circuit Breaker for LED Lighting Circuits
A 10A breaker does not "support" a fixed number of watts. What it supports is a conductor, a connected load and a start-up profile that all line up with each other. Four things have to be checked together:
01
Connected lighting load
Add up the real power of all fixtures on the branch, then allow for driver efficiency and power factor. A 2,300VA figure is not 2,300W of LED.
02
Driver inrush current
Get the peak inrush and pulse duration from the driver datasheet. The combined effect depends on how many drivers switch on at the same moment.
03
Cable capacity
Installation method, grouping, ambient temperature and voltage drop all change what the cable can carry — cross-section alone proves nothing.
04
Fault level at the board
Choose between 6kA and 10kA against the prospective short-circuit current at the installation point, and confirm the disconnection time can be met.
P (W)Real power
÷
U (V)Supply voltage
×
cos φPower factor
That gives the running current, not the start-up current. For LED circuits the design also has to account for driver efficiency, the inrush pulse and the number of drivers switched simultaneously. Where a branch carries a large number of drivers, split it across more branches or use a staged switching arrangement rather than lifting the breaker rating.
Technical Specifications
Product type
Miniature Circuit Breaker (MCB)
Rated current
10A
Trip curve
Type C by default; Types B and D available as options
Rated voltage
AC 230V / 400V; DC version subject to confirmation
Breaking capacity
6kA / 10kA options
Pole configurations
1P, 1P+N, 2P, 3P, 4P
Mounting
35mm DIN rail
Housing material
Flame-retardant PC, as specified
Handle indication
ON / OFF / intermediate trip position, subject to model
Ambient temperature
-25°C to +70°C, subject to product rating and derating requirements
Degree of protection
IP20, for installation in a suitable enclosure
Single-pole dimensions
18mm W × 80mm H × 66mm D
Referenced standards
IEC 60898-1 and GB 10963.1; confirm applicable editions and certification
Specifications are based on the supplied product information. Confirm the exact model, operating conditions, trip characteristics, breaking capacity and applicable documentation before ordering.
Where This Breaker Fits
Hotel room lightingBranch boards serving room lighting and bedside circuits.
LED strip and coveRetail interiors, showrooms and display joinery.
Commercial ceiling lightingOffice and corridor lighting branches in commercial fit-outs.
LED advertising displaysPower branches for indoor advertising and signage panels.
Exhibition spacesLighting distribution for temporary and permanent displays.
Retail interior lightingTrack and pendant lighting across shop floors.
For outdoor advertising or lighting exposed to weather, the enclosure and installation must provide the environmental protection — the IP20 rating applies to the device itself and does not make it weatherproof.
Coordination With Surge Protection and Other Board Devices
An MCB and an SPD do different jobs, and neither replaces the other. The MCB protects against overcurrent; an SPD limits transient overvoltage. Where surge protection forms part of the lighting board design, the SPD may need a dedicated backup protector per its manufacturer's instructions, and the whole arrangement should be laid out inside the distribution box with the clearances and conductor sizing that design requires.
Where residual-current protection is specified for the circuit, it is added alongside the MCB — an ordinary MCB does not detect residual current. Device compatibility, ratings and coordination are confirmed together before the board is finalised.
Packing, Carton and Export Data
Standard packing configurationEXPORT CARTON
Inner packingNeutral paper box / custom printed
Inner box size220 × 96 × 73mm
Outer cartonCorrugated carton
Outer carton size50.5 × 31 × 23.5cm
Carton materialFive-layer corrugated board
Custom optionsPrinting, labels, language sets
1P12 pcs / box
2P6 pcs / box
3P4 pcs / box
4P3 pcs / box
Carton counts and pallet plans can be worked out from the quantities above before the order is confirmed. If the project needs mixed-pole cartons, barcode labels or market-specific language sets, tell us the destination and handling method and we will confirm the packing that fits.
Quality, OEM and Ordering Details
Quality control covers incoming material inspection on conductive components, bimetallic elements and housing material, followed by finished-product voltage-withstand, continuity and operating-function checks. Batch samples are run for short-circuit performance and simulated LED start-up current conditions, alongside high- and low-temperature testing. Where those records matter for project approval, ask for the test conditions, sampling plan and reports for the exact model — a stated test category does not by itself prove a particular service life.
OEM marking and packaging are supported, so the cover, handle and carton can carry your brand, part number and language set — send the artwork and tell us how you want the marking customized. Production runs in our Chinafactory, and because we also build SPDs and distribution boxes, one supplier can cover the whole lighting protection package rather than just the breaker.
For a lighting project quotation, the details that matter most are: supply voltage and pole configuration, total connected lighting load, LED driver models and inrush data, number of drivers switched simultaneously, cable cross-section and installation method, prospective short-circuit current, required breaking capacity and trip curve, enclosure dimensions and ambient temperature, applicable standards, and OEM marking and packaging requirements.
Reviewing these before order confirmation keeps an unsuitable trip characteristic or breaking capacity out of the shipment.
Frequently Asked Questions
How many watts of LED lighting can a 10A breaker support?
There is no single wattage limit that fits every LED installation. At 230V, 10A corresponds to 2,300VA under a simplified single-phase calculation, but the allowable real-power load depends on power factor, driver efficiency, cable capacity, installation conditions, local design rules and start-up current. With multiple drivers on one branch, the combined inrush has to be evaluated as well.
Will a C curve prevent tripping when the LED lights are switched on?
Not in every case. A C curve gives a higher instantaneous magnetic range than a B curve — 50–100A for a 10A device — but the result depends on the combined inrush current and duration of the connected drivers. Check the driver's inrush data and the proposed number of simultaneously switched units before the circuit design is fixed.
Can a B curve be used for LED lighting instead?
A B curve version may suit LED circuits with sufficiently low start-up current. Base the choice on the load's actual inrush characteristics and the fault-disconnection conditions required — not on a general rule that one curve is always better than another.
Is this breaker suitable for outdoor LED advertising displays?
It may suit an appropriately designed power distribution branch, but the application needs more than a breaker rating. Verify the supply arrangement, load current, driver start-up characteristics, fault level and enclosure protection. The device is rated IP20 and must be installed inside a suitable enclosure for the intended environment.
What is the difference between the 6kA and 10kA versions?
The breaking capacity is the short-circuit current the device is rated to interrupt under specified test conditions. The correct option depends on the prospective short-circuit current at the installation point and the applicable installation requirements. Confirm the rating for the exact model and voltage.
How is the 10A MCB packed for shipment?
Units go into a neutral paper box of 220 × 96 × 73mm — 12 pcs for 1P, 6 pcs for 2P, 4 pcs for 3P and 3 pcs for 4P — then into a five-layer corrugated outer carton of 50.5 × 31 × 23.5cm. Custom printed inner boxes, labels and language sets are available.
Can the breaker be supplied with OEM branding?
OEM marking and packaging can be arranged for the selected configuration. Confirm the marking artwork, packaging specification, order quantity, available documents and lead time before the order is placed.
What should be checked before installing the breaker in a lighting board?
Verify supply voltage, cable capacity, connected load, LED driver inrush current, trip curve, breaking capacity and enclosure conditions. The installation should comply with the applicable electrical regulations and the manufacturer's instructions. If the circuit carries a large number of drivers, assess whether load distribution or staged switching is required.
Send the driver data, the branch count and the board layout
We will confirm the 10A Miniature Circuit Breaker curve, pole configuration and breaking capacity for your lighting board, and reply with wholesale pricing, samples, packing plan and lead time.
Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy