English
Products
1000V DC Type 2 Solar Surge Protection Device 2P
  • 1000V DC Type 2 Solar Surge Protection Device 2P1000V DC Type 2 Solar Surge Protection Device 2P
  • 1000V DC Type 2 Solar Surge Protection Device 2P1000V DC Type 2 Solar Surge Protection Device 2P
  • 1000V DC Type 2 Solar Surge Protection Device 2P1000V DC Type 2 Solar Surge Protection Device 2P
  • 1000V DC Type 2 Solar Surge Protection Device 2P1000V DC Type 2 Solar Surge Protection Device 2P

1000V DC Type 2 Solar Surge Protection Device 2P

The 1000V DC Type 2 Solar Surge Protection Device 2P is designed for photovoltaic DC circuits. Rated at Uc 1000VDC, In 20kA and Imax 40kA, it features a voltage protection level of Up ≤3.4kV, plug-in modules and independent thermal disconnection. It is suitable for installation in PV combiner boxes, inverter cabinets and DC distribution panels.

The 1000V DC Type 2 Solar Surge Protection Device 2P from TUZHAN Electric is designed for secondary surge protection in compatible 1000VDC photovoltaic systems. It helps limit transient overvoltages caused by induced lightning surges and switching events, reducing the risk of damage to solar inverter inputs and other DC-side equipment.

Built around two TZU-40 DC protection modules, the device provides separate protection paths from DC+ to PE and DC− to PE. Each module features an independent thermal disconnection mechanism and visual fault indicator, helping maintenance teams identify the affected module during inspection.

For solar equipment manufacturers, PV installers and electrical distributors, the plug-in module construction, standard 35mm DIN-rail mounting and flame-retardant PA66 housing make this model practical for integration into suitable combiner boxes and DC distribution cabinets.

1000VDC Maximum continuous operating voltage (Uc)
20 / 40kA Nominal and maximum discharge current, 8/20μs
2P Plug-in Separate positive-to-earth and negative-to-earth protection paths

Technical Specifications

Use the following specifications to check compatibility with your PV system, enclosure and surge protection design before ordering.

Parameter Specification
Brand TUZHAN Electric
Model TZU-40 2P 1000VDC
Product Type Type 2 Solar DC Surge Protective Device (SPD)
Application Compatible 1000VDC photovoltaic systems
Module Configuration 2 × TZU-40 DC modules
Maximum Continuous Operating Voltage (Uc) 1000VDC
Nominal Discharge Current (In) 20kA (8/20μs)
Maximum Discharge Current (Imax) 40kA (8/20μs)
Voltage Protection Level (Up) ≤3.4kV
Protection Paths DC+ to PE; DC− to PE
Thermal Disconnection Independent mechanism for each module
Status Indication Visual fault indicator on each module
Housing Material Flame-retardant PA66
Flammability Rating UL94 V-0
Operating Temperature -40°C to +80°C
Mounting 35mm DIN rail
Protection Degree IP20
Installation Location Inside a suitable electrical enclosure
Optional Accessories DC surge backup protector (SCB), grounding copper bar

How the Two-Pole DC Protection Works

The TZU-40 2P uses metal oxide varistor (MOV) technology to respond to transient overvoltages. During normal operation, the MOV elements remain at high impedance and carry only a small leakage current. When a surge occurs, they conduct surge current through the designated protection paths to help limit the voltage reaching connected equipment.

Separate Protection Paths for DC+ and DC−

The two modules are arranged to protect the positive and negative DC conductors relative to protective earth. Correct connection depends on the system grounding configuration and the product wiring diagram. This is particularly important when integrating the SPD into an existing PV combiner box or inverter DC compartment.

Independent Thermal Disconnection

Repeated surge exposure and component ageing can affect MOV performance. Each module has its own thermal disconnection mechanism, allowing the affected protection element to be disconnected when the specified operating conditions are reached. The visual indicator supports inspection and maintenance, but does not replace scheduled checks or electrical testing.

Plug-in Modules for Servicing

The plug-in construction supports individual module replacement when permitted by the manufacturer's instructions. This can simplify service work and spare-parts management compared with replacing the complete assembly. Always isolate the circuit and verify it is de-energized before carrying out maintenance.

Where This Solar DC SPD Can Be Used

PV Combiner Boxes

Provides secondary surge protection at a designated DC protection point in compatible residential, commercial or industrial photovoltaic installations.

Solar Inverter DC Inputs

Helps limit transient overvoltages entering inverter-side DC circuits when installed and coordinated according to the system protection design.

DC Distribution Cabinets

Suitable for protected installation in compatible 1000VDC distribution cabinets with adequate wiring space and enclosure protection.

Related DC Installations

May be considered for other DC applications only after confirming voltage rating, grounding arrangement, fault conditions and the manufacturer's specified use.

Installation and Selection Points

Confirm the Maximum PV Array Voltage

The 1000VDC Uc rating must be assessed against the PV array's maximum open-circuit voltage, including the increase in string voltage at the lowest expected operating temperature. Do not select an SPD based only on the nominal system voltage.

Check the Protection Level and System Design

The specified Up is ≤3.4kV. Confirm that this protection level is appropriate for the withstand voltage of the inverter and other protected equipment. Cable lengths, grounding arrangements and coordination with upstream or downstream SPDs can affect the protection achieved at the equipment terminals.

Coordinate with Upstream Protection

Type 2 protection is intended for secondary surge protection. Depending on lightning exposure, the building's external lightning protection system and project requirements, Type 1 or Type 1+2 protection may also be necessary. Select coordinated devices according to the applicable installation design rather than treating different SPD types as interchangeable.

Consider DC Backup Protection

A compatible DC surge backup protector (SCB) may be required by the manufacturer's instructions or the project's fault-current conditions. Check the recommended backup device, prospective short-circuit current and coordination requirements. Do not select the SCB solely by nominal current.

Install Inside a Suitable Enclosure

The IP20 device is intended for protected installation, not direct exposure to rain or dust. For outdoor photovoltaic equipment, select an enclosure suitable for the site's moisture, dust, temperature and corrosion conditions, and ensure that the installation meets applicable electrical requirements.

Before installation: Verify the system voltage, polarity, grounding configuration, wiring diagram and backup protection requirements. Installation and maintenance should be carried out by qualified personnel with the circuit safely isolated.

Quality Control and Product Inspection

TUZHAN Electric's stated inspection process for this product covers key components, protective functions and finished-product checks. For procurement teams, confirming the applicable inspection records and technical documents before order placement helps establish clear acceptance requirements.

MOV Component Inspection

Incoming MOV components are sampled for inspection. The stated checks include 8/20μs surge-current testing and high- and low-temperature ageing checks before components proceed to production.

Thermal Disconnection Checks

Production-batch samples undergo thermal disconnection testing to check the operation of the safety mechanism under the applicable test conditions.

Finished-Product Testing

The stated final inspection includes DC withstand testing, residual voltage testing and visual status indication checks. Confirm the exact test scope and acceptance criteria for the specific model when technical records are required for a project.

Batch Records and Traceability

Production, testing, inspection and shipment records are maintained by batch to support product traceability. Available test reports and technical documents can be confirmed during quotation and order review; certification or report availability should be verified for the specific model rather than assumed.

Key Features for Purchasing Teams

Feature Practical Value
Type 2 DC protection Designed for secondary surge protection in compatible PV DC circuits.
Uc 1000VDC For compatible 1000VDC systems after maximum array voltage verification.
In 20kA / Imax 40kA Provides stated nominal and maximum discharge current ratings using an 8/20μs waveform.
Up ≤3.4kV Allows engineers to assess the specified voltage protection level against equipment requirements.
Two plug-in modules Separate DC+ to PE and DC− to PE protection paths.
Independent thermal disconnection Each module has its own disconnection mechanism.
Visual fault indicators Helps maintenance staff identify a module requiring inspection.
35mm DIN-rail mounting Compatible with standard DIN-rail installation where enclosure space permits.
IP20 housing Requires installation inside a suitable electrical enclosure.

Frequently Asked Questions

What does 2P mean on this solar DC SPD?

2P refers to the two-module configuration, with separate protection paths for DC+ to PE and DC− to PE. Follow the wiring diagram and verify compatibility with the system grounding arrangement.

Can this device be used in an AC circuit?

No. The TZU-40 2P is designed for compatible DC applications. An AC installation requires an SPD specifically rated and configured for the relevant AC system.

What do In 20kA and Imax 40kA mean?

In is the nominal discharge current rating, while Imax is the maximum discharge current rating. Both values are specified using an 8/20μs waveform and represent different test ratings.

Can this model protect a 1500VDC photovoltaic system?

This model is specified for compatible 1000VDC applications. Do not use it in a 1500VDC system unless the full product ratings and system design explicitly support that application. A suitably rated SPD should be selected for a 1500VDC array.

Can the modules be replaced individually?

The plug-in construction supports individual module replacement. Confirm the correct replacement module and follow the manufacturer's maintenance procedure. Isolate the circuit and verify it is de-energized before servicing.

Can it be installed outdoors without an enclosure?

No. The IP20 rating requires installation inside a suitable electrical enclosure. The enclosure must provide environmental protection appropriate to the installation site.

Does the SPD require an SCB backup protector?

The requirement depends on the manufacturer's coordination instructions, prospective short-circuit current and system design. Confirm the recommended backup protection and its ratings before ordering or installation.

What should I provide when requesting a quotation?

Provide the quantity, destination country, PV system voltage, installation location, required delivery schedule and any OEM requirements. If your project requires specific test reports or technical documents, list them in the inquiry so their availability can be checked before order confirmation.

About TUZHAN Electric

WENZHOU TUSH-AN ELECTRIC CO., LTD was established in 2018. Its team has more than 20 years of experience in low-voltage electrical products and focuses on surge protective devices (SPD), surge backup protectors (SCB), miniature circuit breakers (MCB) and related electrical protection products.

The factory operates two dedicated SPD automatic assembly lines and two production lines for socket-type terminal surge protection products. Equipment includes a glue filling machine, automatic welding machines and testing equipment. The stated monthly capacity across the SPD product range is approximately 100,000 units, while socket-type Type III SPDs have a stated daily capacity of 5,000 units.

TUZHAN Electric serves overseas markets, particularly the Middle East and South America. Standard products may be available from stock, subject to current inventory. The company also supports OEM and ODM cooperation for customers developing their own brands or adapting products to project requirements.

MOQ, Customization and Order Support

Sample and Minimum Order Quantities

Order Type MOQ Details
Sample order 1–10 pcs Free samples may be available for qualifying requests; freight is collected.
Standard product 50 pcs per model Standard MOQ for regular orders.
OEM logo printing 200 pcs Customer logo and marking customization.
Housing or circuit modification 1,000 pcs Subject to technical evaluation and confirmation.
Distributor orders Negotiable Mixed models and consolidated shipments can be discussed.

Sample availability, final MOQ and freight arrangements should be confirmed with the sales team before ordering.

OEM and ODM Options

Branding and packaging: Customer logo printing, product marking and customized color packaging are available. Under the stated service arrangement, standard logo and packaging customization does not require an additional tooling fee.

Product modifications: Selected projects may involve changes to internal protection component parameters, socket layout, housing appearance or color. Technical feasibility, samples and final specifications must be confirmed before production.

Export documentation: English product materials, manuals and available test reports or qualification documents can be discussed according to the model and order requirements.

Production Lead Time

Order Type Stated Lead Time
Stock order, approximately 50–500 pcs 3–7 days for dispatch
Regular bulk order, approximately 500–5,000 pcs 7–15 days for production
OEM logo-printing order 12–18 days
ODM tooling or modification project Approximately 40 days for tooling confirmation, plus 15 days for batch production
Urgent order Priority scheduling may be available after confirmation, with an additional rush fee where applicable.

Actual lead time depends on inventory, order quantity, customization requirements and the production schedule. Confirm the dispatch date before placing an order.

Shipping Options

Available arrangements include FOB Ningbo or Wenzhou, CIF destination port, air freight and door-to-door shipping, subject to destination, shipment size and agreed trade terms.

Warranty and Technical Support

The stated warranty is two years for qualifying component quality failures, subject to the applicable warranty terms. Unauthorized disassembly, incorrect installation, water ingress, corrosion and surge events exceeding the product's specified ratings may be excluded.

TUZHAN Electric provides online technical consultation and assistance with surge protection scheme design. The stated response targets are within two hours for domestic inquiries and within 24 hours for overseas written inquiries, taking time-zone differences into account.

Request a Quote for the 1000V DC Type 2 Solar Surge Protection Device 2P

Contact TUZHAN Electric for current pricing, availability, technical confirmation and OEM options. Share your application details so the product configuration and order conditions can be checked before purchasing.

Include the following in your inquiry:

Required quantity, destination country, PV system voltage, installation location, standard or OEM requirements, target delivery date and required technical documents.

Our team can confirm the applicable specifications, available documentation, MOQ, production lead time and shipping arrangements for your order.

Contact TUZHAN Electric
Send Inquiry
Contact Info
Send your product requirements, target specifications and order quantities to discuss suitable electrical protection products, quotations and production arrangements with our team.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept